TRANSFORMER COOLER

Using quick connect hoses, and the optional trailer, your Heatsink transformer cooler can be transferred easily. The air cooled oil coolers are designed to dissipate heat from the oil of generator transformer cooler.

We are able to totally upgrade your cooling configuration, which could include removing external transformer cooler bank arrangements and supplying modern tank fittings. The tank has lifting lugs for lifting the transformer and at least four jacking points an the lower part if the tank for lifting by hydraulic jacks.

Designates the output which a transformer cooler can deliver at rated voltage and frequency without exceeding a specified temperature rise. We’ve built our business on the superiority of the integral mono aluminum fin tube in transformer cooler design.

The following types of transformer cooler are available:

• Power Station Cooler Systems


• Industrial Air-Cooler Systems


• Diesel & Gas Engine Cooler


• Modular Standard Cooler


• Transformer Oil Cooler


• Generator cooler


• Motor cooler


• Air preheater


• Air-cooled condenser


• Air heater


• Air cooler

Similarly in transformer coolers are used to cool transformer oil by air or water. These transformers coolers play an important role in smooth functioning of main equipments.
An efficient transformer cooler manufacturer will loose less power through heat and operate at a cooler temperature.

The transformer cooler temperature rise is an excellent indicator of the efficiency and quality of a transformer cooling system.

The lower watts loss of the trasnformer cooler operating transformer may extend the life of other components inside the panel as well. The spill occurred when a fan blade support cracked due to fatigue and heat stress and separated from a fan on the transformer cooler. As an example, a very efficient transformer cooler will run cooler, be physically larger, and cost more than a less efficient transformer.

The best way to transform a transformer cooler is to design what you want from scratch the way engineers do, look for a transformer cooler in your junk box with a core size close to what is needed, and transform it.
The technical specification of our output transformer cooler exactly mirrors the performance of the original and remains stable under all conditions.

A more efficient transformer cooler can pay for itself many times over during its 25-year lifespan. The transformer cooler plays a key role in an electrical system’s efficiency and power quality. Since transformer cooler manufacturers test only under ideal conditions, as called for in present construction standards, a substantial gap exists between published loss data and actual losses incurred after installation.

These losses, also known as no-load losses, are present the entire time the transformer cooler is powered on, regardless of whether there’s any load or not.
The low temperature rise transformer cooler is designed to run cooler than a standard transformer when fully loaded.

When energy savings are driving part or all of the justification for selecting a particular transformer cooler, it’s important that these savings are indeed present once the transformer cooler is installed. Insulating liquids like transformer oil cooler have very high dielectric strength.


This is accomplished in the transformer cooler, so the transformer shouldbe of a sufficient size for the amount of power it is transferring. They are now
separated by about a 3/8 inch air gap allowing for better heat
loss, and should keep the transformer cooler.

You might even consider adding a resistor between the rectifier and storage capacitor or in series with the priy to keep the regulator and transformer cooler. Enerfin's advanced all welded construction transformer cooler product has been upgraded over the last 2 years in conjunction with one of its major customers.